UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 8-K
CURRENT REPORT
Pursuant to Section 13 or 15(d) of the
Securities Exchange Act of 1934
Date of Report: December 14, 2010
(Date of earliest event reported)
ENTEROMEDICS INC.
(Exact name of registrant as specified in its charter)
Commission File Number: 1-33818
| Delaware | 48-1293684 | |
| (State or other jurisdiction of incorporation) | (IRS Employer Identification No.) |
2800 Patton Road, St. Paul, Minnesota 55113
(Address of principal executive offices, including zip code)
(651) 634-3003
(Registrant’s telephone number, including area code)
Not Applicable
(Former name or former address, if changed since last report)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
| ¨ | Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) |
| ¨ | Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) |
| ¨ | Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) |
| ¨ | Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
| Item 3.02 | Unregistered Sales of Equity Securities. |
On December 14, 2010, pursuant to the terms of the Underwriting Agreement, dated December 8, 2010, between EnteroMedics Inc. (the “Company”) and Craig-Hallum Capital Group LLC (the “Underwriter”), the Company issued a warrant to purchase 340,400 shares of the Company’s common stock at an exercise price of $2.19 per share to the Underwriter (the “Underwriter Warrant”). The Underwriter purchased the Underwriter Warrant from the Company for $100 as partial compensation for its services as underwriter to the Company in connection with the Company’s public offering of 17,020,000 shares of common stock together with warrants to purchase 17,020,000 shares of common stock (the “Offering”), registered on the Company’s Registration Statements on Form S-1, as amended (File Nos. 333-170503 and 333-171052) (the “Registration Statement”). The Offering, including the exercise of the Underwriter’s over-allotment option, which was previously disclosed on the Company’s Current Report on Form 8-K filed on December 10, 2010, closed on December 14, 2010. The Underwriter Warrant will become exercisable 181 days from the date of issuance on December 14, 2010 and the exercise period will end five years from December 8, 2010, the date of effectiveness of the Registration Statement. The Underwriter Warrant does not allow for cashless exercise. The Underwriter Warrant was issued in a private placement transaction exempt from registration in reliance on Section 4(2) of the Securities Act of 1933, as amended. This description of the terms of the Underwriter Warrant is qualified in its entirety by the form of Underwriter Warrant which is attached as Exhibit 10.1 to this Current Report on Form 8-K and incorporated herein by reference.
| Item 8.01 | Other Events. |
Closing of Public Offering
On December 14, 2010, the Company issued a press release announcing the closing of the Offering. A copy of this press release is filed as Exhibit 99.1 to this Current Report on Form 8-K and is incorporated herein by reference.
Conversion of Outstanding Preferred Stock
On December 14, 2010, immediately following the completion of the Offering, all of the Company’s outstanding Series A Non-Voting Convertible Preferred Stock (the “Convertible Preferred Stock”) automatically converted on a 1:1 basis into 3,394,309 shares of common stock in accordance with its terms. The Convertible Preferred Stock was issued by the Company on September 30, 2010 in connection with a private placement transaction to several accredited investors, which was previously disclosed on the Company’s Current Report on Form 8-K filed on October 5, 2010.
Updated Risk Factors
The Registration Statement filed by the Company in connection with the Offering contains updates to the risk factors contained in the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2009, which was filed with the SEC on March 29, 2010. A copy of the updated risk factors is filed herewith as Exhibit 99.2 and is incorporated herein by reference.
| Item 9.01 | Financial Statements and Exhibits. |
(d) Exhibits
| Exhibit |
Description | |
| 10.1 | Form of Underwriter Warrant | |
| 99.1 | Press Release dated December 14, 2010 | |
| 99.2 | Risk Factors | |
SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| ENTEROMEDICS INC. | ||
| By: | /S/ GREG S. LEA | |
| Greg S. Lea | ||
| Senior Vice President and Chief Financial Officer | ||
Date: December 14, 2010
EXHIBIT INDEX
| Exhibit |
Description | |
| 10.1 | Form of Underwriter Warrant | |
| 99.1 | Press Release dated December 14, 2010 | |
| 99.2 | Risk Factors | |
Exhibit 10.1
THIS WARRANT MAY NOT BE SOLD, OFFERED FOR SALE,
PLEDGED, HYPOTHECATED OR OTHERWISE TRANSFERRED.
STOCK PURCHASE WARRANT
To Subscribe for and Purchase
Common Stock of
ENTEROMEDICS INC.
THIS CERTIFIES THAT, for value received, Craig-Hallum Capital Group LLC, or its registered assigns, (herein referred to as the “Purchaser” or “holder”), is entitled to subscribe for and purchase from EnteroMedics Inc. (herein called the “Company”), a corporation organized and existing under the laws of the State of Delaware, Three Hundred Forty Thousand Four Hundred (340,400) fully paid and nonassessable shares (“Shares”) of common stock (herein the “Common Stock”) (subject to the limitation in Section 2(b) and to adjustment as noted below) at the exercise price of $2.19 per Share (the “Warrant Purchase Price”) (subject to adjustment as noted below). This Warrant may only be exercised during the Exercise Period specified herein. This Warrant has been issued together with Shares of the Common Stock in a public offering of 14,800,000 Shares of the Common Stock and 14,800,000 Warrants registered on the Company’s Registration Statements on Form S-1 (the “Registration Statement”) filed with the U.S. Securities and Exchange Commission (the “SEC”) on November 10, 2010, as amended and December 8, 2010 (the “Offering”).
This Warrant is subject to the following provisions, terms and conditions:
1. The Warrant exercise period (the “Exercise Period”) for this Warrant shall begin on the date that is 181 days from the date of the issuance of this Warrant at the closing of the Offering and shall end on the fifth anniversary of the date of effectiveness of the Registration Statement.
2. The rights represented by this Warrant may be exercised by the holder hereof as follows:
(a) The rights represented by this Warrant may be exercised by the holder hereof, in whole or in part, by written notice of exercise delivered to the Company and by the surrender of this Warrant (properly endorsed if required) at the principal office of the Company and upon payment to it by check of the Warrant Purchase Price for such Shares. The Company agrees that the Shares so purchased shall be and are deemed to be issued to the holder hereof as the record owner of such Shares as of the close of business on the date on which this Warrant shall have been surrendered and payment made for such Shares as aforesaid. Subject to the provisions of the next succeeding paragraph, within 10 business days after the rights represented by this Warrant shall have been exercised the Company shall cause its transfer agent to issue the Shares of stock so purchased to Purchaser in book–entry format and deliver evidence of such issuance to Purchaser, and, unless this Warrant has expired, a new Warrant representing the number of Shares, if any, with respect to which this Warrant shall not then have been exercised shall also be delivered to the holder hereof within such time.
(b) Notwithstanding any other provision in this Warrant, no holder shall be permitted to exercise this Warrant for an amount of Common Stock that would result in such holder owning more than 19.99% of the Company’s Common Stock outstanding after such exericise.
3. The Company represents and warrants that this Warrant has been duly authorized by all necessary corporate action, has been duly executed and delivered and is a legal and binding obligation of the Company, enforceable against the Company in accordance with the terms of this Warrant, except to the extent (i) such enforceability may be limited by applicable bankruptcy, insolvency, reorganization, moratorium or similar laws affecting creditors’ and contracting parties’ rights generally and (ii) such enforceability may be subject to general principles of equity (regardless of whether such enforceability is considered in a proceeding in equity or at law). The Company covenants and agrees that all Shares which may be issued upon the exercise of the rights represented by this Warrant according to the terms hereof or represented by the Common Stock will, upon issuance and payment therefor, be duly authorized and issued, fully paid and nonassessable. The Company further covenants and agrees that during the period within which the rights represented by this Warrant may be exercised, the Company will at all times have authorized, and reserved for the purpose of issue or transfer upon exercise of the subscription rights evidenced by this Warrant, a sufficient number of shares of its Common Stock to provide for the exercise of the rights represented by this Warrant, free from preemptive rights or other actual contingent purchase rights other than those held by a holder of this Warrant (as a result of holding this Warrant).
4. The Company will pay any documentary stamp taxes attributable to the issuance of Shares of Common Stock upon the exercise of this Warrant; provided, however, that the Company shall not be required to pay any tax which may be payable in respect of any transfer involved in the registration of any certificates for Warrants, or shares of Common Stock issued upon exercise of this Warrant, in a name other than that of the Purchaser. The Purchaser shall be responsible for all other tax liability that may arise as a result of holding or transferring this Warrant or receiving Shares of Common Stock upon exercise hereof.
5. The above provisions are, however, subject to the following:
(a) The Warrant Purchase Price shall, from and after the date of issuance of this Warrant, be subject to adjustment from time to time as hereinafter provided. Upon each adjustment of the Warrant Purchase Price, the holder of this Warrant shall thereafter be entitled to purchase, at the Warrant Purchase Price resulting from such adjustment, the number of Shares obtained by multiplying the Warrant Purchase Price in effect immediately prior to such adjustment by the number of Shares purchasable pursuant hereto immediately prior to such adjustment and dividing the product thereof by the warrant purchase price resulting from such adjustment.
(b) In case the Company shall at any time subdivide its outstanding shares of Common Stock into a greater number of shares, the Warrant Purchase Price in effect
2
immediately prior to such subdivision shall be proportionately reduced, and conversely, in case the outstanding shares of Common Stock of the Company shall be combined into a smaller number of shares, the Warrant Purchase Price in effect immediately prior to such combination shall be proportionately increased.
(c) If any capital reorganization or reclassification of the capital stock of the Company, shall be effected in such a way that holders of Common Stock shall be entitled to receive stock or securities with respect to or in exchange for Common Stock, then, as a condition of such reorganization, reclassification or consolidation, lawful and adequate provision shall be made whereby the holder hereof shall thereafter have the right to purchase and receive, upon the basis and upon the terms and conditions specified in this Warrant and in lieu of the Shares of the Common Stock of the Company immediately theretofore purchasable and receivable upon the exercise of the rights represented hereby, such shares of stock or securities as may be issued or payable with respect to or in exchange for a number of outstanding shares of such Common Stock equal to the number of shares of such stock immediately theretofore purchasable and receivable upon the exercise of the rights represented hereby had such reorganization, reclassification or consolidation not taken place, and in any such case appropriate provision shall be made with respect to the rights and interests of the holder of this Warrant to the end that the provisions hereof (including without limitation provisions for adjustments of the warrant purchase price and of the number of shares purchasable upon the exercise of this Warrant) shall thereafter be applicable, as nearly as may be, in relation to any shares of stock or securities thereafter deliverable upon the exercise hereof.
(d) Upon any adjustment of the Warrant Purchase Price or any adjustment of any material terms hereof, then and in each such case an officer of the Company shall, as soon as practicable after the occurrence of any event that requires an adjustment or readjustment, give signed written notice thereof, by first–class mail, postage prepaid, addressed to the registered holder of this Warrant at the address of such holder as shown on the books of the Company, which notice shall state the Warrant Purchase Price resulting from such adjustment, any material change in the terms of the Warrant, and the increase or decrease, if any, in the number of Shares purchasable at such price upon the exercise of this Warrant, setting forth in reasonable detail the method of calculation and the facts upon which such calculation is based.
(e) In case any time:
(i) there shall be any capital reorganization, or reclassification of the capital stock of the Company; or
(ii) there shall be a voluntary or involuntary dissolution, liquidation or winding up of the Company;
then, in any one or more of said cases, the Company shall give written notice, by first–class mail, postage prepaid, addressed to the registered holder of this Warrant at the address of such holder as shown on the books of the Company, of the date on which (A) the books of the Company shall close or a record shall be
3
taken for such distribution or subscription rights, or (B) such reorganization, reclassification or consolidation, dissolution, liquidation or winding up, or conversion or redemption shall take place, as the case may be. Such notice shall also specify the date as of which the holders of capital stock of record shall participate in such distribution or subscription rights, or shall be entitled to exchange their capital stock for securities or other property deliverable upon such reorganization, reclassification, consolidation, dissolution, liquidation or winding up, or conversion or redemption, as the case may be. Such written notice shall be given at least 20 days prior to the action in question and not less than 20 days prior to the record date or the date on which the Company’s transfer books are closed in respect thereto.
(f) If any event occurs as to which in the opinion of the Board of Directors of the Company the other provisions of this Section 5 are not strictly applicable or if strictly applicable would not fairly protect the purchase rights of the holder of this Warrant or of Common Stock in accordance with the essential intent and principles of such provisions, then the Board of Directors shall make an adjustment in the application of such provisions, in accordance with such essential intent and principles, so as to protect such purchase rights as aforesaid.
6. This Warrant shall not entitle the holder hereof to any voting rights or other rights as a stockholder of the Company.
7. This Warrant may not be sold, offered for sale, pledged, hypothecated or otherwise transferred and must be held by the Purchaser until it is exercised for Shares of Common Stock in accordance with paragraphs 1 and 2 above. In addition, without limiting the first sentence of this Section 7, pursuant to Rule 5110(g) of the Financial Industry Regulatory Authority, Inc., this Warrant shall not be sold during the Offering, or sold, transferred, assigned, pledged, or hypothecated, or be the subject of any hedging, short sale, derivative, put, or call transaction that would result in the effective economic disposition of this Warrant or the Shares of Common Stock acquirable upon exercise hereof, by any person for a period of 180 days immediately following the date of effectiveness or commencement of sales of the Offering, except as provided in paragraph (g)(2) of Rule 5110(g) of the Financial Industry Regulatory Authority, Inc.
8. This Warrant is exchangeable, upon the surrender hereof by the holder hereof at the principal office of the Company, for new Warrants of like tenor representing in the aggregate the right to subscribe for and purchase the number of shares which may be subscribed for and purchased hereunder, each of such new Warrants to represent the right to subscribe for and purchase such number of shares as shall be designated by said holder hereof at the time of such surrender.
9. This Warrant has been registered with the SEC and qualified by state authorities, or an exemption from such registration and qualification requirements is available. The Shares of Common Stock issuable upon exercise of the Warrant may be transferred and sold in reliance on the Registration Statement. Pursuant to Section 4(t) of the Purchase Agreement, dated December 8, 2010, between the Company and Craig-Hallum Capital Group LLC (the “Purchase
4
Agreement”), the Company will, at its own expense, prepare and file with the SEC, and keep effective with the SEC, a registration statement with respect to the Shares of Common Stock issuable upon exercise of this Warrant such that the holder hereof may exercise this warrant and a holder of the Shares of Common Stock acquired upon exercise hereof may resell such Shares to the public for a period of time at least equal to the Exercise Period plus two years following the expiration date thereof. The Company and the holder acknowledge and agree that the Company’s obligation relating to the registration of the Shares of Common Stock issuable upon exercise of this Warrant pursuant to this Section 9 and Section 4(t) of the Purchase Agreement is a one-time obligation, and that holder’s countersignature to this Warrant upon its issuance constitutes holder’s one-time exercise of such registration rights.
10. The Company will not be required upon the exercise of this Warrant to issue fractions of shares of Common Stock, but may, at its option, either (a) purchase such fraction for an amount in cash equal to the current value of such fraction computed on the basis of the closing market price of a share of Common Stock as quoted on the principal exchange or trading facility on which shares of Common Stock are traded on the trading day immediately preceding the day upon which this Warrant was surrendered for exercise in accordance with Section 2 hereof, or (b) issue the required share. By accepting this Warrant, the holder hereof expressly waives any right to receive any fractional share upon exercise of a Warrant, except as expressly provided in this Section 10.
11. If this Warrant is exercised for less than all of the then-current number of shares purchasable hereunder, then the Company shall, concurrently with the issue of the Shares of stock purchased by Purchaser upon such exercise in accordance with Section 2, issue a new warrant exercisable for the remaining number of shares purchasable under this Warrant.
12. Upon receipt by the Company of evidence reasonably satisfactory to it of the loss, theft, destruction or mutilation of this Warrant and security reasonably satisfactory to it, the Company shall execute and deliver a new warrant of like tenor as the Warrant so lost, stolen, destroyed or mutilated.
13. All questions concerning this Warrant will be governed and interpreted and enforced in accordance with the internal law, not the law of conflicts, of the State of Delaware.
[remainder of this page intentionally left blank]
5
IN WITNESS WHEREOF, EnteroMedics Inc. has caused this Warrant to be signed by its duly authorized officer and this Warrant to be dated as of the date set forth above.
| ENTEROMEDICS INC. | ||||
| By |
| |||
| Its |
| |||
| Acknowledged and agreed: | ||
| Craig-Hallum Capital Group LLC | ||
| By |
| |
| Name |
| |
| Its |
| |
SUBSCRIPTION FORM
To be Executed by the Holder of this Warrant if such Holder
Desires to Exercise this Warrant in Whole or in Part
| To: | EnteroMedics Inc. (the “Company”) |
The undersigned
Please insert Social Security or other
identifying number of Subscriber:
hereby irrevocably elects to exercise the right of purchase represented by this Warrant for, and to purchase thereunder, shares of the Common Stock (the “Common Stock”) provided for therein and tenders payment herewith to the order of the Company in the amount of $ , such payment being made as provided on the face of this Warrant.
The undersigned requests that certificates for such shares of Common Stock be issued as follows:
| Name: |
|
| Address: |
| |
| Deliver to: |
| |
| Address: |
| |
and, if such number of shares of Common Stock shall not be all the shares of Common Stock purchasable hereunder, that a new Warrant for the balance remaining of the shares of Common Stock purchasable under this Warrant be registered in the name of, and delivered to, the undersigned at the address stated above.
Dated:
| Signature |
| |
| Note: The signature on this Subscription Form must correspond with the name as written upon the face of this Warrant in every particular, without alteration or enlargement or any change whatever. |
Exhibit 99.1
Contact:
EnteroMedics Inc.
Greg S. Lea
(651) 789-2860
ir@enteromedics.com
EnteroMedics Announces Closing of $29.8 Million Public Offering
of Common Stock and Warrants
ST. PAUL, Minnesota, December 14, 2010 – EnteroMedics Inc., (NASDAQ: ETRM), the developer of medical devices using neuroblocking technology to treat obesity and other gastrointestinal disorders, today announced the closing of its previously announced public offering of 17.02 million shares of the Company’s common stock together with warrants to purchase an additional 17.02 million shares of common stock, which includes 2.22 million shares of common stock and corresponding warrants pursuant to the exercise in full by the underwriter of its over-allotment option, at an aggregate price of $1.75 per share and corresponding warrant. Total net proceeds to the Company from the offering are approximately $27.6 million after deducting underwriting discounts and commissions and estimated offering expenses. The warrants have an exercise price of $2.19 per share of common stock, are exercisable beginning 181 days after the closing date of the offering, and are exercisable for five years after the date the warrants first become exercisable.
The Company intends to use the net proceeds of this offering to continue work toward regulatory approval of the Maestro RC System in the United States, for international commercialization efforts, for clinical and product development activities and for other working capital and general corporate purposes.
Craig-Hallum Capital Group, LLC acted as the sole book-running manager for the offering.
This press release does not constitute an offer to sell or the solicitation of an offer to buy securities and shall not constitute an offer, solicitation or sale in any jurisdiction in which such offer, solicitation or sale is unlawful. A copy of the prospectus relating to this offering may be obtained by contacting Craig-Hallum Capital Group, LLC, 222 South Ninth Street, Suite 350, Minneapolis, MN55402, by calling 612-334-6300, or by emailing Nick.Gergen@Craig-Hallum.com.
About EnteroMedics Inc.
EnteroMedics is a development stage medical device company focused on the design and development of devices that use neuroblocking technology to treat obesity and other gastrointestinal disorders. EnteroMedics’ proprietary neuroblocking technology, VBLOC® vagal blocking therapy, is designed to intermittently block the vagus nerves using high-frequency, low-energy, electrical
impulses. These electrical impulses are delivered by a neuroregulator which is powered either by an external controller (Maestro RF System) or an integrated rechargeable battery (EnteroMedics’ next-generation Maestro RC System). For more information, visit www.enteromedics.com.
Forward-Looking Safe Harbor Statement:
This press release contains forward-looking statements about EnteroMedics Inc. Our actual results could differ materially from those discussed due to known and unknown risks, uncertainties and other factors including our limited history of operations; our losses since inception and for the foreseeable future; our lack of regulatory approval for our Maestro® System for the treatment of obesity; our preliminary findings from our EMPOWER™ pivotal trial; our ability to comply with the Nasdaq continued listing requirements; our ability to commercialize our Maestro System; our dependence on third parties to initiate and perform our clinical trials; the need to obtain regulatory approval for any modifications to our Maestro System; physician adoption of our Maestro System and VBLOC® vagal blocking therapy; our ability to obtain third party coding, coverage or payment levels; ongoing regulatory compliance; our dependence on third party manufacturers and suppliers; the successful development of our sales and marketing capabilities; our ability to raise additional capital when needed; international commercialization and operation; our ability to attract and retain management and other personnel and to manage our growth effectively; potential product liability claims; potential healthcare fraud and abuse claims; healthcare legislative reform and our ability to obtain and maintain intellectual property protection for our technology and products. These and additional risks and uncertainties are described more fully in the Company’s filings with the Securities and Exchange Commission, particularly those factors identified as “risk factors” in the registration statement on Form S-1 filed with the Securities and Exchange Commission on November 10, 2010, as amended. We are providing this information as of the date of this press release and do not undertake any obligation to update any forward-looking statements contained in this document as a result of new information, future events or otherwise.
Caution-Investigational device. Limited by U.S. Federal law to investigational use.
The implantation procedure and usage of the Maestro® System carry some risks, such as the risk generally associated with laparoscopic procedures and those related to treatment as described in the EMPOWER clinical trial informed consent.
# # #
Exhibit 99.2
All references in this document to “we,” “us,” “our” and “EnteroMedics” refer to EnteroMedics Inc. and its subsidiary unless the context requires otherwise.
Risks Related to Our Financial Condition and Capital Requirements
We are a clinical development stage company with a limited history of operations and no approved products, and we cannot assure you that we will ever have a commercialized product.
We are a clinical development stage company with a limited operating history upon which you can evaluate our business. We currently do not have any products cleared in the United States or approved for commercialization or any other source of revenue, and we do not expect to have a commercialized product earlier than the second half of 2011 outside the United States and not until late 2013 within the United States, if at all. We have been engaged in research and development and clinical trials since our inception in 2002 and have invested substantially all of our time and resources in developing our VBLOC therapy, which we intend to commercialize initially in the form of our Maestro System. The success of our business will depend on our ability to obtain regulatory approval to market our Maestro System and any products we may develop in the future and our ability to create product sales, successfully introduce new products, establish our sales force and control costs, all of which we may be unable to do. If we are unable to successfully develop, receive regulatory approval for and commercialize our Maestro System for its indicated use, we may never generate revenue or be profitable and we may have to cease operations. Our lack of a significant operating history also limits your ability to make a comparative evaluation of us, our products and our prospects.
We have incurred losses since inception and we anticipate that we will continue to incur increasing losses for the foreseeable future. If we are unable to raise additional capital, we may be unable to continue as a going concern.
We have incurred losses in each year since our formation in 2002. As of September 30, 2010, we had experienced net losses during the development stage of $146.6 million. Our net loss applicable to common stockholders for the nine months ended September 30, 2010 was $13.4 million and for the fiscal years ended December 31, 2009, 2008 and 2007 was $31.9 million, $37.9 million and $28.6 million, respectively. We have funded our operations to date principally from the sale of our securities and through the issuance of indebtedness. Development of a new medical device, including conducting clinical trials and seeking regulatory approvals, is a long, expensive and uncertain process. If our Maestro System is approved for marketing by the U.S. Food and Drug Administration (FDA), Australian Therapeutic Goods Administration (TGA) or regulatory authority of another country we expect to incur significant sales and marketing expenses prior to recording sufficient revenue to offset these expenses. We expect our general and administrative expenses to increase as we continue to add the infrastructure necessary to support operating as a public company and develop our intellectual property portfolio. For these reasons, we expect to continue to incur significant and increasing operating losses for the next several years. These losses, among other things, have had and will continue to have an adverse effect on our stockholders’ equity and working capital. Because of the numerous risks and uncertainties associated with developing new medical devices, we are unable to predict the extent of any future losses or when we will become profitable, if ever.
Without additional capital, we may run out of cash in the first half of 2011, which has raised a substantial doubt about our ability to continue as a going concern. We have prepared our consolidated financial statements for the nine months ended September 30, 2010 and the year ended December 31, 2009 on a going concern basis, which contemplates the realization of assets and satisfaction of liabilities and other commitments in the normal
course of business. The funding of our operations beyond the first half of 2011 will require additional investments in our company in the form of equity or debt financing or through collaboration, licensing or other similar arrangements. There is no assurance that we will be able to raise sufficient capital to continue as a going concern.
We will need substantial additional funding and may be unable to raise capital when needed, which would force us to delay, reduce or eliminate our product development programs or liquidate some or all of our assets.
Our operations have consumed substantial amounts of cash since inception. We expect to continue to spend substantial amounts on research and development, including conducting current and future clinical trials for our Maestro System, and initiating the commercialization of our product. Cash used in operations was $10.1 million for the nine months ended September 30, 2010 and $24.7 million, $33.7 million and $23.4 million for the fiscal years ended December 31, 2009, 2008 and 2007, respectively. Our cash used in operations beyond September 30, 2010 will largely depend on our regulatory path forward. If we obtain adequate funding and launch the approved clinical trial using the next-generation Maestro RC System in the treatment of morbid obesity, ReCharge, we would expect research and development expenditures to increase in support of that study in addition to the continued follow-up on existing trials, such as VBLOC-DM2 ENABLE and EMPOWER. In 2011 and the years following, we expect that our cash used in operations will be significant, and we will need to raise additional capital to continue our research and development programs, commercialize our Maestro System, if approved by the TGA or FDA, and fund our on going operations.
Our future funding requirements will depend on many factors, including:
| • | the scope, rate of progress, results and cost of our clinical trials and other research and development activities; |
| • | the cost and timing of regulatory approvals; |
| • | the cost and timing of establishing sales, marketing and distribution capabilities; |
| • | the cost of establishing clinical and commercial supplies of our Maestro System and any products that we may develop; |
| • | the rate of market acceptance of our Maestro System and VBLOC therapy and any other product candidates; |
| • | the cost of filing and prosecuting patent applications and defending and enforcing our patent and other intellectual property rights; |
| • | the cost of defending, in litigation or otherwise, any claims that we infringe third-party patent or other intellectual property rights; |
| • | the effect of competing products and market developments; |
| • | the cost of explanting clinical devices; |
| • | the terms and timing of any collaborative, licensing or other arrangements that we may establish; |
| • | any revenue generated by sales of our future products; and |
| • | the extent to which we invest in products and technologies, although we currently have no commitments or agreements relating to these types of transactions. |
Until the time, if ever, when we can generate a sufficient amount of product revenue, we expect to finance our future cash needs through public or private equity offerings, debt financings or corporate collaboration, licensing arrangements and grants, as well as through interest income earned on cash balances.
Additional capital may not be available on terms favorable to us, or at all. If we raise additional funds by issuing equity securities, our stockholders may experience dilution. Debt financing, if available, may involve restrictive covenants or additional security interests in our assets. Any additional debt or equity financing that we
2
complete may contain terms that are not favorable to us or our stockholders. Issuing public equity or debt securities may also be more costly or time-consuming for us because the aggregate market value of our common stock held by non-affiliates (public float) is less than $75.0 million (calculated in accordance with the U.S. Securities and Exchange Commission (SEC) rules and regulations), which limits the size of offerings we may make using a Form S-3 registration statement to 1/3 of our public float for any twelve month period. If we raise additional funds through collaboration and licensing arrangements with third parties, it may be necessary to relinquish some rights to our technologies or products, or grant licenses on terms that are not favorable to us. If we are unable to raise adequate funds, we may have to delay, reduce the scope of, or eliminate some or all of, our development programs or liquidate some or all of our assets.
We incur significant costs as a result of operating as a public company, and our management is required to devote substantial time to new compliance initiatives.
As a public company, we incur significant legal, accounting and other expenses. In addition, the Sarbanes-Oxley Act of 2002, as well as rules subsequently implemented by the SEC and NASDAQ have imposed various requirements on public companies, including establishment and maintenance of effective disclosure and financial controls and changes in corporate governance practices. Our management and other personnel devote a substantial amount of time to these compliance initiatives. Moreover, these rules and regulations result in increased legal and financial compliance costs and will make some activities more time-consuming and costly.
The Sarbanes-Oxley Act of 2002 requires, among other things, that we maintain effective internal controls for financial reporting and disclosure. In particular, we are required to perform system and process evaluation and testing of our internal controls over financial reporting to allow management to report on the effectiveness of our internal controls over financial reporting, as required by Section 404 of the Sarbanes-Oxley Act. Our testing may reveal deficiencies in our internal controls over financial reporting that are deemed to be material weaknesses. We have incurred and continue to expect to incur significant expense and devote substantial management effort toward ensuring compliance with Section 404. Moreover, if we do not comply with the requirements of Section 404, or if we identify deficiencies in our internal controls that are deemed to be material weaknesses, the market price of our stock could decline and we could be subject to sanctions or investigations by NASDAQ, the SEC or other regulatory authorities, which would entail expenditure of additional financial and management resources.
Risks Associated with Development and Commercialization of Our Maestro System
We have not received, and may never receive, approval from the FDA or the regulatory body in any other country to market our Maestro RC System for the treatment of obesity.
We do not have the necessary regulatory approvals to market our Maestro System in the United States or in any foreign market other than the European Community for which we received CE Mark approval for our Maestro RF System on March 4, 2009. We plan initially to launch our product, if approved, in countries outside the United States. We are hoping to receive CE Mark approval on our next-generation Maestro RC System in first quarter 2011 and immediately thereafter use that approval to seek approval from the TGA to market the system in Australia by the second half of 2011.
In order to market our Maestro System outside of the United States, we will need to establish and comply with the numerous and varying regulatory requirements of other countries regarding safety and efficacy. Approval procedures vary among countries and can involve additional product testing and additional administrative review periods. The time required to obtain approval in other countries may differ from that required to obtain FDA approval. The regulatory approval process in other countries may also include all of the risks detailed below regarding FDA approval in the United States. Regulatory approval in one country does not ensure regulatory approval in another, but a failure or delay in obtaining regulatory approval in one country may
3
negatively impact the regulatory process in others. While we have received the European CE Mark for our Maestro RF System, we cannot assure you when, or if, we will be able to commence sales in the European Economic Area or obtain approval to market our Maestro System in other countries outside the United States.
We cannot market our product in the United States unless it has been approved by the FDA. The FDA approval process involves, among other things, successfully completing clinical trials and obtaining a premarket approval (PMA). The PMA process requires us to prove the safety and efficacy of our Maestro System to the FDA’s satisfaction. This process can be expensive and uncertain, requires detailed and comprehensive scientific and human clinical data, generally takes one to three years after a PMA application is filed, and notwithstanding the effort and expense incurred, may never result in the FDA granting a PMA. Because VBLOC therapy represents a novel way to effect weight loss in the treatment of obesity, and because there is a large population of obese patients who might be eligible for treatment, it is possible that the FDA and other regulatory bodies will review an application for approval of our Maestro System with greater scrutiny, which could cause that process to be lengthier and more involved than that for products without such characteristics. The FDA can delay, limit or deny approval of a PMA application for many reasons, including:
| • | our inability to demonstrate safety or effectiveness to the FDA’s satisfaction; |
| • | the data from our preclinical studies and clinical trials may be insufficient to support approval; |
| • | the facilities of our third-party manufacturers or suppliers may not meet applicable requirements; |
| • | our compliance with preclinical, clinical or other regulations; |
| • | our inability to demonstrate through our ongoing clinical trials that the Maestro System causes EWL greater than the control therapy; |
| • | our inability to meet the FDA’s statistical requirements or changes in statistical tests or significance levels the FDA requires for approval of a medical device, including ours; and |
| • | changes in the FDA approval policies, expectations with regard to the type or amount of scientific data required or adoption of new regulations may require additional data or additional clinical studies. |
In addition, recent, widely-publicized events concerning the safety of certain drug, food and medical device products have raised concerns among members of Congress, medical professionals, and the public regarding the FDA’s handling of these events and its perceived lack of oversight over regulated products. The increased attention to safety and oversight issues could result in a more cautious approach by the FDA to clearances and approvals for devices such as ours.
We may not obtain the necessary regulatory approvals to market our Maestro System in the United States or anywhere else. Even if we obtain approval, the FDA or other regulatory authorities may require expensive or burdensome post-market testing or controls. Any delay in, failure to receive or maintain, or significant limitation on approval for our Maestro System could prevent us from generating revenue or achieving profitability and we may be forced to cease operations.
The preliminary results of the blinded segment of our EMPOWER trial were not sufficient to support approval of a PMA application, and this has delayed regulatory approval of our Maestro System.
In September 2009, we completed the blinded segment of our EMPOWER pivotal trial, a randomized, prospective, placebo-controlled multi-center trial of our Maestro System in the United States. Based on our initial analysis, the EMPOWER trial did not meet its primary and secondary efficacy endpoints in that the weight loss for the treatment arm was not statistically different from the control arm in which therapy was turned off. The study did meet its safety endpoint. The inability to achieve our primary and secondary efficacy endpoints in the EMPOWER trial has delayed our timeline for achieving regulatory approval of the Maestro System in the U.S. and caused us to need additional capital to fund a new pivotal trial. We may never be able to produce sufficient data to support a PMA application with the FDA or commercialize a product in the U.S.
4
We may be unable to enroll and complete a pivotal trial using our next-generation Maestro RC System or other clinical trials, or we may experience significant delays in completing our clinical trials, which could prevent or delay regulatory approval of our Maestro System and impair our financial position.
We recently obtained an approved Investigational Device Exemption (IDE) for a pivotal trial using our next-generation Maestro RC System. Assuming that we successfully enroll and implant the trial and achieve favorable results, we plan to use data from that trial to support a PMA application for the Maestro System. We expect to commence the trial upon receipt of adequate funding and approval from the relevant institutional review boards at the various sites at which we intend to conduct the trial. Conducting a clinical trial of this size, which involves screening, assessing, testing, treating and monitoring patients at several sites across the country and possibly internationally, and coordinating with patients and clinical institutions, is a complex and uncertain process.
The commencement of our trial could be delayed for a variety of reasons, including:
| • | obtaining adequate funds to support the trial cost; |
| • | reaching agreement on acceptable terms with prospective clinical trial sites; |
| • | manufacturing sufficient quantities of our Maestro System; |
| • | obtaining institutional review board approval to conduct the trial at a prospective site; and |
| • | obtaining sufficient patient enrollment, which is a function of many factors, including the size of the patient population, the nature of the protocol, the proximity of patients to clinical sites, the difficulty in getting patients to endure the implant for the control arm, and the eligibility criteria for the trial. |
Once the trial has begun, the completion of the trial, and our other ongoing clinical trials, could be delayed, suspended or terminated for several reasons, including:
| • | ongoing discussions with regulatory authorities regarding the scope or design of our preclinical results or clinical trial or requests for supplemental information with respect to our preclinical results or clinical trial results; |
| • | our failure or inability to conduct the clinical trials in accordance with regulatory requirements; |
| • | sites currently participating in the trial may drop out of the trial, which may require us to engage new sites or petition the FDA for an expansion of the number of sites that are permitted to be involved in the trial; |
| • | patients may not remain in or complete, clinical trials at the rates we expect; |
| • | patients may experience serious adverse events or side effects during the trial, which, whether or not related to our product, could cause the FDA or other regulatory authorities to place the clinical trial on hold; |
| • | clinical investigators may not perform our clinical trials on our anticipated schedule or consistent with the clinical trial protocol and good clinical practices; and |
| • | we may be unable to obtain a sufficient supply of our Maestro System necessary for the timely conduct of the clinical trials. |
If our clinical trials are delayed it will take us longer to ultimately commercialize a product and generate revenue or the delay could result in our being unable to do so. Moreover, our development costs will increase if we have material delays in our clinical trials or if we need to perform more or larger clinical trials than planned.
5
Even if we obtain the necessary regulatory approvals, our efforts to commercialize our Maestro System may not succeed or may encounter delays which could significantly harm our ability to generate revenue.
If we obtain regulatory approval to market our Maestro System, our ability to generate revenue will depend upon the successful commercialization of this product. Our efforts to commercialize our Maestro System may not succeed for a number of reasons, including:
| • | our Maestro System may not be accepted in the marketplace by physicians, patients and third-party payors; |
| • | the price of our Maestro System, associated costs of the surgical procedure and treatment and the availability of sufficient third-party reimbursement for the procedure and therapy implantation and follow-up procedures; |
| • | appropriate reimbursement and/or coding options may not exist to enable billing for the system implantation and follow-up procedures; |
| • | we may not be able to sell our Maestro System at a price that allows us to meet the revenue targets necessary to generate revenue for profitability; |
| • | the frequency and severity of any side effects of our VBLOC therapy; |
| • | physicians and potential patients may not be aware of the perceived effectiveness and sustainability of the results of VBLOC therapy provided by our Maestro System; |
| • | we, or the investigators of our product, may not be able to have information on the outcome of the trials published in medical journals; |
| • | the availability and perceived advantages and disadvantages of alternative treatments; |
| • | any rapid technological change may make our product obsolete; |
| • | we may not be able to have our Maestro System manufactured in commercial quantities or at an acceptable cost; |
| • | we may not have adequate financial or other resources to complete the development and commercialization of our Maestro System or to develop sales and marketing capabilities for our Maestro System; and |
| • | we may be sued for infringement of intellectual property rights and could be enjoined from manufacturing or selling our products. |
Besides requiring physician adoption, market acceptance of our Maestro System will depend on successfully communicating the benefits of our VBLOC therapy to three additional constituencies involved in deciding whether to treat a particular patient using such therapy: (1) the potential patients themselves; (2) institutions such as hospitals, where the procedure would be performed and opinion leaders in these institutions; and (3) third-party payors, such as private healthcare insurers and governmental payors, such as Medicare and Medicaid in the U.S., and Medical Services Advisory Committee (MSAC) in Australia, which would ultimately bear most of the costs of the various providers and equipment involved in our VBLOC therapy. Marketing to each of these constituencies requires a different marketing approach, and we must convince each of these groups of the efficacy and utility of our VBLOC therapy to be successful.
If our VBLOC therapy, or any other neuroblocking therapy for other gastrointestinal diseases and disorders that we may develop, does not achieve an adequate level of acceptance by the relevant constituencies, we may not generate significant product revenue and may not become profitable. The earliest we expect to be able to commercialize our Maestro System is the second half of 2011 outside the United States and not until late 2013 within the United States, if at all. If we are not successful in the commercialization of our Maestro System for the treatment of obesity we may never generate any revenue and may be forced to cease operations.
6
We depend on clinical investigators and clinical sites to enroll patients in our clinical trials, and on other third parties to manage the trials and to perform related data collection and analysis, and, as a result, we may face costs and delays that are outside of our control.
We rely on clinical investigators and clinical sites to enroll patients in our clinical trials, including a new pivotal trial using our next-generation Maestro RC System, and other third parties to manage the trials and to perform related data collection and analysis. However, we may not be able to control the amount and timing of resources that clinical sites may devote to our clinical trials. If these clinical investigators and clinical sites fail to enroll a sufficient number of patients in our clinical trials, to ensure compliance by patients with clinical protocols or comply with regulatory requirements, we will be unable to complete these trials, which could prevent us from obtaining regulatory approvals for our product. Our agreements with clinical investigators and clinical trial sites for clinical testing place substantial responsibilities on these parties and, if these parties fail to perform as expected, our trials could be delayed or terminated. If these clinical investigators, clinical sites or other third parties do not carry out their contractual duties or obligations or fail to meet expected deadlines, or if the quality or accuracy of the clinical data they obtain is compromised due to their failure to adhere to our clinical protocols, regulatory requirements or for other reasons, our clinical trials may be extended, delayed or terminated, or the clinical data may be rejected by the FDA, and we may be unable to obtain regulatory approval for, or successfully commercialize, our product.
Assuming we receive regulatory approval for the Maestro System, modifications to the Maestro System may require additional approval from the regulatory agencies such as FDA and TGA, which may not be obtained or may delay our commercialization efforts.
The FDA and TGA require medical device companies to initially make and document a determination of whether or not a modification requires a new approval, supplement or clearance; however, the FDA can review a company’s decision. Any modifications to an FDA- or TGA-approved device that could significantly affect its safety or efficacy, or that would constitute a major change in its intended use could require additional clinical studies and separate regulatory applications. Product changes or revisions will require all the regulatory steps and associated risks discussed above possibly including testing, regulatory filings and clinical study. We may not be able to obtain approval of supplemental regulatory approvals for product modifications, new indications for our product or new products. Delays in obtaining future clearances would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our commercialization efforts and future growth.
Our neuroblocking therapy for the treatment of obesity is a unique form of treatment. Physicians may not widely adopt our Maestro System and VBLOC therapy unless they determine, based on experience, long-term clinical data and published peer reviewed journal articles, that VBLOC therapy provides a safe and effective alternative to other existing treatments for obesity.
We believe we are the first and only company currently pursuing neuroblocking therapy for the treatment of obesity. Physicians tend to be slow to change their medical treatment practices because of the time and skill required to learn a new procedure, the perceived liability risks arising from the use of new products and procedures, and the uncertainty of third-party coverage and reimbursement. Physicians may not widely adopt our Maestro System and VBLOC therapy unless they determine, based on experience, long-term clinical data and published peer reviewed journal articles, that the use of our VBLOC therapy provides a safe and effective alternative to other existing treatments for obesity, including pharmaceutical solutions and bariatric surgical procedures.
We cannot provide any assurance that the data collected from our current and planned clinical trials will be sufficient to demonstrate that our VBLOC therapy is an attractive alternative to other obesity treatment procedures. We rely on experienced and highly trained surgeons to perform the procedures in our clinical trials and both short- and long-term results reported in our clinical trials may be significantly more favorable than typical results of practicing physicians, which could negatively impact rates of adoption of our Maestro System
7
and VBLOC therapy. We believe that published peer-reviewed journal articles and recommendations and support by influential physicians regarding our Maestro System and VBLOC therapy will be important for market acceptance and adoption, and we cannot assure you that we will receive these recommendations and support, or that supportive articles will be published.
If we fail to obtain adequate coding, coverage or payment levels for our product by governmental healthcare programs and other third-party payors, there may be no commercially viable markets for our Maestro System or other products we may develop or our target markets may be much smaller than expected.
Healthcare providers generally rely on third-party payors, including governmental payors, such as Medicare and Medicaid in the U.S., and MSAC in Australia, as well as private healthcare insurers, to adequately cover and reimburse the cost of medical devices. Importantly, third-party payors are increasingly challenging the price of medical products and services and instituting cost containment measures to control or significantly influence the purchase of medical products and services. We expect that third-party payors will continue to attempt to contain or reduce the costs of healthcare by challenging the prices charged for healthcare products and services. If reimbursement for our Maestro System and the related surgery and facility costs is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, market acceptance of our Maestro System will be impaired and our future revenue, if any, would be adversely affected. As such, even if we obtain regulatory clearance or approval for our Maestro System and begin to market it, the availability and level of third-party coverage and reimbursement could substantially affect our ability to commercialize our Maestro System and other products we may develop.
The efficacy, safety, ease of use and cost-effectiveness of our Maestro System and of any competing products will, in part, determine the availability and level of coverage and payment. In particular, we expect that securing coding, coverage and payment for our Maestro System will be more difficult if our clinical trials do not demonstrate a percentage of excess weight loss from a pre-implementation baseline that healthcare providers and obese individuals consider clinically meaningful, whether or not regulatory agencies consider the improvement of patients treated in clinical trials to have been clinically meaningful.
In some international markets, pricing of medical devices is subject to government control. In the United States and international markets, we expect that both government and third-party payors will continue to attempt to contain or reduce the costs of healthcare by challenging the prices charged for healthcare products and services. If payment for our Maestro System and the related surgery and facility costs is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, market acceptance of our Maestro System will be impaired and our future revenue, if any, would be adversely affected.
We cannot predict the likelihood or pace of any significant regulatory or legislative action in any of these areas, nor can we predict whether or in what form healthcare legislation being formulated by various governments will be passed. We also cannot predict with precision what effect such governmental measures would have if they were ultimately enacted into law. However, in general, we believe that such legislative activity will likely continue. If adopted, such measures can be expected to have an impact on our business.
Even if our Maestro System is approved by regulatory authorities, if we or our suppliers fail to comply with ongoing regulatory requirements, or if we experience unanticipated product problems, our Maestro System could be subject to restrictions or withdrawal from the market.
Completion of our clinical trials and commercialization of our Maestro System will require access to manufacturing facilities that meet applicable regulatory standards to manufacture a sufficient supply of our product. We rely solely on third parties to manufacture and assemble our Maestro System, and do not currently plan to manufacture or assemble our Maestro System ourselves in the future.
Any product for which we obtain marketing approval, along with the manufacturing processes, post-approval clinical data and promotional activities for such product, will be subject to continual review and periodic inspections by our European Notified Body and the FDA and other regulatory bodies. In particular we
8
and our manufacturers and suppliers are required to comply with ISO requirements, Good Manufacturing Practices (GMP), which for medical devices is called the Quality System Regulation (QSR), and other regulations which cover the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, storage and shipping of any product for which we obtain marketing approval. The FDA enforces the QSR through unannounced inspections and the CE system enforces its certification through inspections and audits as well. We and our third-party manufacturers and suppliers have not yet been inspected by the FDA but have received European ISO certification to standards ISO 13485:2003 and will have to continue to successfully complete such inspections to maintain regulatory approvals for sales outside the United States and will have to successfully complete such inspections before we receive regulatory approvals for our Maestro System in the United States. Failure by us or one of our manufacturers or suppliers to comply with statutes and regulations administered by the FDA, CE authorities and other regulatory bodies, or failure to adequately respond to any observations, could result in enforcement actions against us or our manufacturers or suppliers, including, restrictions on our product or manufacturing processes, withdrawal of the product from the market, voluntary or mandatory recall, fines, suspension of regulatory approvals, product seizures, injunctions or the imposition of civil or criminal penalties.
If any of these actions were to occur it would harm our reputation and cause our product sales to suffer. Furthermore, our key component suppliers may not currently be or may not continue to be in compliance with applicable regulatory requirements. If the FDA or any other regulatory body finds their compliance status to be unsatisfactory, our commercialization efforts could be delayed, which would harm our business and our results of operations.
Even if regulatory approval of a product is granted, the approval may be subject to limitations on the indicated uses for which the product may be marketed. If the FDA determines that our promotional materials, training or other activities constitute promotion of an unapproved use, we could be subject to significant liability, the FDA could request that we cease, correct or modify our training or promotional materials or subject us to regulatory enforcement actions. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our training or other promotional materials to constitute promotion of an unapproved use, which could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement.
We are subject to medical device reporting regulations (MDR) that require us to report to the FDA and TGA or governmental authorities in other countries if our products cause or contribute to a death or serious injury or malfunction in a way that would be reasonably likely to contribute to death or serious injury if the malfunction were to recur. The FDA, TGA and similar governmental authorities in other countries have the authority to require the recall of our products in the event of material deficiencies or defects in design or manufacturing. A government mandated, or voluntary, recall by us could occur as a result of component failures, manufacturing errors or design defects, including defects in labeling. Any recall would divert managerial and financial resources and could harm our reputation with customers. There can be no assurance that there will not be product recalls in the future or that such recalls would not have a material adverse effect on our business. Once the product is approved and implanted in a large number of patients, infrequently occurring adverse events may appear that were not observed in the clinical trials. This could cause health authorities in countries where the product is available to take regulatory action, including marketing suspension and recall.
We may not be successful in our efforts to utilize our VBLOC therapy to treat co-morbidities associated with obesity and other gastrointestinal diseases and disorders.
As part of our long-term business strategy, we plan to research the application of our VBLOC therapy to treat co-morbidities associated with obesity and other gastrointestinal diseases and disorders. Research to identify new target applications requires substantial technical, financial and human resources, whether or not any new applications for our VBLOC therapy are ultimately identified. We may be unable to identify or pursue other applications of our technology. Even if we identify potential new applications for our VBLOC therapy,
9
investigating the safety and efficacy of our therapy requires extensive clinical testing, which is expensive and time-consuming. If we terminate a clinical trial in which we have invested significant resources, our prospects will suffer, as we will have expended resources on a program that will not provide a return on our investment and missed the opportunity to allocate those resources to potentially more productive uses. We will also need to obtain regulatory approval for these new applications, as well as achieve market acceptance and an acceptable level of reimbursement.
We depend on a limited number of manufacturers and suppliers of various critical components for our Maestro System. The loss of any of these manufacturer or supplier relationships could delay our clinical trials or prevent or delay commercialization of our Maestro System.
We rely entirely on third parties to manufacture our Maestro System and to supply us with all of the critical components of our Maestro System, including our leads, implantable batteries, neuroregulators and controllers. If any of our existing suppliers were unable or unwilling to meet our demand for product components, or if the components or finished products that they supply do not meet quality and other specifications, clinical trials or commercialization of our product could be delayed. Alternatively, if we have to switch to a replacement manufacturer or replacement supplier for any of our product components, we may face additional regulatory delays, and the manufacture and delivery of our Maestro System could be interrupted for an extended period of time, which could delay completion of our clinical trials or commercialization of our Maestro System. In addition, we may be required to use different suppliers or components to obtain regulatory approval from the FDA.
If our device manufacturers or our suppliers are unable to provide an adequate supply of our product following the start of commercialization, our growth could be limited and our business could be harmed.
In order to produce our Maestro System in the quantities that we anticipate will be required to meet anticipated market demand, we will need our manufacturers to increase, or scale-up, the production process by a significant factor over our current level of production. There are technical challenges to scaling-up manufacturing capacity and developing commercial-scale manufacturing facilities that may require the investment of substantial additional funds by our manufacturers and hiring and retaining additional management and technical personnel who have the necessary manufacturing experience. If our manufacturers are unable to do so, we may not be able to meet the requirements for the launch of the product or to meet future demand, if at all. We may also represent only a small portion of our supplier’s or manufacturer’s business and if they become capacity constrained they may choose to allocate their available resources to other customers that represent a larger portion of their business. We currently anticipate that we will continue to rely on third-party manufacturers and suppliers for the production of the Maestro System following commercialization. If we develop and obtain regulatory approval for our product and are unable to obtain a sufficient supply of our product, our revenue, business and financial prospects would be adversely affected.
If we are unable to establish sales and marketing capabilities or enter into and maintain arrangements with third parties to market and sell our Maestro System, our business may be harmed.
We do not have a sales organization and have no experience as a company in sales, marketing and distribution of our product. To generate sales we will need to identify and enter into an agreement with a third-party distributor in Australia, our intended first market for product commercial launch. There is no assurance that we can do so on economically acceptable terms or that if we do so, that third party will be successful in selling our product. In the rest of the world and the United States, we will also develop a sales and marketing infrastructure or contract with third parties to perform that function. Developing a sales force is expensive and time consuming and could delay or limit the success of any product launch. Even if we obtain approval from the FDA to market our Maestro System, we may be unable to develop an effective sales and marketing organization on a timely basis, if at all. If we develop our own sales and marketing capabilities, our sales force will be competing with the experienced and well-funded marketing and sales organizations of our
10
more established competitors. If we are unable to establish our own sales and marketing capabilities, we will need to contract with third parties to market and sell our product. In this event, our profit margins would likely be lower than if we performed these functions ourselves. In addition, we would necessarily be relying on the skills and efforts of others for the successful marketing of our product. If we are unable to establish and maintain effective sales and marketing capabilities, independently or with others, we may not be able to generate product revenue and may not become profitable.
If we attempt to commercialize our products outside of the United States, our business will be susceptible to risks associated with international operations.
We intend to commercialize our products internationally, initially in Australia, and subsequently in other international markets, if any, in which we obtain necessary regulatory approvals. Conducting international operations would subject us to unique risks, including:
| • | unfamiliar legal requirements with which we would need to comply; |
| • | fluctuations in currency exchange rates; |
| • | potentially adverse tax consequences, including the complexities of foreign value added tax systems and restrictions on the repatriation of earnings; |
| • | increased financial accounting and reporting burdens and complexities; and |
| • | reduced or varied protection for intellectual property rights in some countries. |
The occurrence of any one of these risks could negatively affect our business and results of operations generally. Additionally, operating in international markets also requires significant management attention. We cannot be certain that investments required to establish operations in other countries will produce desired levels of revenues or profitability.
We may be unable to attract and retain management and other personnel we need to succeed.
Our success depends on the services of our senior management and other key research and development employees. The loss of the services of one or more of our officers or key research and development employees could delay or prevent the successful completion of our clinical trials and the commercialization of our Maestro System. Upon receiving regulatory approval for our product, we expect to expand our operations and grow our research and development, product development and administrative operations. Our growth will require hiring a number of qualified clinical, scientific, commercial and administrative personnel. Accordingly, recruiting and retaining such personnel in the future will be critical to our success. There is intense competition from other companies and research and academic institutions for qualified personnel in the areas of our activities. If we fail to identify, attract, retain and motivate these highly skilled personnel, we may be unable to continue our development and commercialization activities.
We may be unable to manage our growth effectively.
Our business strategy entails significant future growth. For example, we will have to expand existing operations in order to conduct additional clinical trials, increase our contract manufacturing capabilities, hire and train new personnel to handle the marketing and sales of our product, assist patients in obtaining reimbursement for the use of our product and create and develop new applications for our technology. This growth may place significant strain on our management and financial and operational resources. Successful growth is also dependent upon our ability to implement appropriate financial and management controls, systems and procedures. Our ability to effectively manage growth depends on our success in attracting and retaining highly qualified personnel, for which the competition may be intense. If we fail to manage these challenges effectively, our business could be harmed.
11
We face the risk of product liability claims that could be expensive, divert management’s attention and harm our reputation and business. We may not be able to obtain adequate product liability insurance.
Our business exposes us to a risk of product liability claims that is inherent in the testing, manufacturing and marketing of medical devices. The medical device industry has historically been subject to extensive litigation over product liability claims. We may be subject to product liability claims if our Maestro System, or any other products we may sell, causes, or appears to have caused, an injury. Claims may be made by consumers, healthcare providers, third-party strategic collaborators or others selling our products.
We have $5.0 million of product liability insurance, which covers the use of our Maestro System and VBLOC therapy in our clinical trials, which amount we believe is appropriate. Our current product liability insurance may not continue to be available to us on acceptable terms, if at all, and, if available, the coverage may not be adequate to protect us against any future product liability claims. If we are unable to obtain insurance at an acceptable cost and on acceptable terms for an adequate coverage amount, or otherwise to protect against potential product liability claims, we could be exposed to significant liabilities, which may harm our business. A product liability claim, recall or other claim with respect to uninsured liabilities or for amounts in excess of insured liabilities could have a material adverse effect on our business, financial condition and results of operations. These liabilities could prevent or interfere with our product commercialization efforts. Defending a suit, regardless of merit, could be costly, could divert management attention and might result in adverse publicity, which could result in the withdrawal of, or inability to recruit, clinical trial volunteers or result in reduced acceptance of our Maestro System and VBLOC therapy in the market.
We may be subject to product liability claims even if it appears that the claimed injury is due to the actions of others. For example, we rely on the expertise of surgeons and other associated medical personnel to perform the medical procedure to implant and remove our Maestro System and to perform the related VBLOC therapy. If these medical personnel are not properly trained or are negligent, the therapeutic effect of our Maestro System and VBLOC therapy may be diminished or the patient may suffer critical injury, which may subject us to liability. In addition, an injury that is caused by the negligence of one of our suppliers in supplying us with a defective component that injures a patient could be the basis for a claim against us. A product liability claim, regardless of its merit or eventual outcome, could result in decreased demand for our products; injury to our reputation; diversion of management’s attention; withdrawal of clinical trial participants; significant costs of related litigation; substantial monetary awards to patients; product recalls or market withdrawals; loss of revenue; and the inability to commercialize our products under development.
We may be subject, directly or indirectly, to United States federal and state healthcare fraud and abuse and false claims laws and regulations. Prosecutions under such laws have increased in recent years and we may become subject to such litigation. If we are unable to, or have not fully complied with such laws, we could face substantial penalties.
If we are successful in achieving regulatory approval to market our Maestro System, our operations will be directly, or indirectly through our customers, subject to various state and federal fraud and abuse laws, including, without limitation, the federal Anti-Kickback Statute and federal False Claims Act. These laws may impact, among other things, our proposed sales, marketing and education programs.
The federal Anti-Kickback Statute prohibits persons from knowingly and willfully soliciting, offering, receiving or providing remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual, or the furnishing or arranging for a good or service, for which payment may be made under a federal healthcare program such as the Medicare and Medicaid programs. Several courts have interpreted the statute’s intent requirement to mean that if any one purpose of an arrangement involving remuneration is to induce referrals of federal healthcare covered business, the statute has been violated. The Anti-Kickback Statute is broad and, despite a series of narrow safe harbors, prohibits many arrangements and practices that are lawful in businesses outside of the healthcare industry. Penalties for violations of the federal Anti-Kickback Statute include criminal penalties and civil sanctions such as fines, imprisonment and possible exclusion from Medicare,
12
Medicaid and other federal healthcare programs. Many states have also adopted laws similar to the federal Anti-Kickback Statute, some of which apply to the referral of patients for healthcare items or services reimbursed by any source, not only the Medicare and Medicaid programs.
The federal False Claims Act prohibits persons from knowingly filing, or causing to be filed, a false claim to, or the knowing use of false statements to obtain payment from the federal government. Suits filed under the False Claims Act, known as “qui tam” actions, can be brought by any individual on behalf of the government and such individuals, commonly known as “whistleblowers,” may share in any amounts paid by the entity to the government in fines or settlement. The frequency of filing qui tam actions has increased significantly in recent years, causing greater numbers of medical device, pharmaceutical and healthcare companies to have to defend a False Claim Act action. When an entity is determined to have violated the federal False Claims Act, it may be required to pay up to three times the actual damages sustained by the government, plus civil penalties for each separate false claim. Various states have also enacted laws modeled after the federal False Claims Act.
We are unable to predict whether we could be subject to actions under any of these laws, or the impact of such actions. If we are found to be in violation of any of the laws described above and other applicable state and federal fraud and abuse laws, we may be subject to penalties, including civil and criminal penalties, damages, fines, exclusion from government healthcare reimbursement programs and the curtailment or restructuring of our operations.
We operate in a highly competitive industry that is subject to rapid change. If our competitors are able to develop and market products that are safer or more effective than our products, our commercial opportunities will be reduced or eliminated.
The health care industry is highly competitive, subject to rapid change and significantly affected by new product introductions and other market activities of industry participants. The obesity treatment market in which we operate has grown significantly in recent years and is expected to continue to expand as technology continues to evolve and awareness of the need to treat the obesity epidemic grows. Although we are not aware of any competitors in the neuroblocking market, we face potential competition from pharmaceutical and surgical obesity treatments. Many of our competitors in the obesity treatment field have significantly greater financial resources and expertise in research and development, manufacturing, preclinical testing, clinical trials, obtaining regulatory approvals and marketing approved products than we do. Smaller or early-stage companies may also prove to be significant competitors, particularly if they pursue competing solutions through collaborative arrangements with large and established companies, such as Allergan, Cyberonics, Johnson & Johnson, Medtronic or St. Jude Medical. Our competitors may develop and patent processes or products earlier than us, obtain regulatory approvals for competing products more rapidly than we are able to and develop more effective, safer and less expensive products or technologies that would render our products non-competitive or obsolete.
Risks Related to Intellectual Property
If we are unable to obtain or maintain intellectual property rights relating to our technology and neuroblocking therapy, the commercial value of our technology and any future products will be adversely affected and our competitive position will be harmed.
Our commercial success depends in part on our ability to obtain protection in the United States and other countries for our Maestro System and VBLOC therapy by establishing and maintaining intellectual property rights relating to or incorporated into our technology and products. To date, we have 16 issued U.S. patents, 12 of which pertain to treating gastrointestinal disorders, and 18 U.S. patent applications. We have 10 Australian applications, 11 European patent applications, 2 Chinese applications, 2 Indian applications, and 1 Japanese application. We also have 1 granted Australian patent, and two European patent applications we believe will be granted. In addition, we are the exclusive licensee to two U.S. patent applications owned by Mayo Foundation for Medical Education and Research, which are unrelated to our VBLOC therapy. Our pending and future patent
13
applications may not issue as patents or, if issued, may not issue in a form that will provide us any competitive advantage. We expect to incur substantial costs in obtaining patents and, if necessary, defending our proprietary rights. The patent positions of medical device companies, including ours, can be highly uncertain and involve complex and evolving legal and factual questions. We do not know whether we will obtain the patent protection we seek, or that the protection we do obtain will be found valid and enforceable if challenged. If we fail to obtain adequate protection of our intellectual property, or if any protection we obtain is reduced or eliminated, others could use our intellectual property without compensating us, resulting in harm to our business. We may also determine that it is in our best interests to voluntarily challenge a third party’s products or patents in litigation or administrative proceedings, including patent interferences or re-examinations. In the event that we seek to enforce any of our owned or exclusively licensed patents against an infringing party, it is likely that the party defending the claim will seek to invalidate the patents we assert, which, if successful could result in the loss of the entire patent or the relevant portion of our patent, which would not be limited to any particular party. Any litigation to enforce or defend our patent rights, even if we were to prevail, could be costly and time-consuming and could divert the attention of our management and key personnel from our business operations. Even if we were to prevail in any litigation, we cannot assure you that we can obtain an injunction that prevents our competitors from practicing our patented technology. Our competitors may independently develop similar or alternative technologies or products without infringing any of our patent or other intellectual property rights, or may design around our proprietary technologies.
We cannot assure you that we will obtain any patent protection that we seek, that any protection we do obtain will be found valid and enforceable if challenged or that it will confer any significant commercial advantage. U.S. patents and patent applications may also be subject to interference proceedings and U.S. patents may be subject to re-examination proceedings in the U.S. Patent and Trademark Office (USPTO) and foreign patents may be subject to opposition or comparable proceedings in the corresponding foreign patent offices, which proceedings could result in either loss of the patent or denial of the patent application, or loss or reduction in the scope of one or more of the claims of, the patent or patent application. In addition, such interference, re-examination and opposition proceedings may be costly. Moreover, the U.S. patent laws may change, possibly making it easier to challenge patents. Some of our technology was, and continues to be, developed in conjunction with third parties, and thus there is a risk that such third parties may claim rights in our intellectual property. Thus, any patents that we own or license from others may provide limited or no protection against competitors. Our pending patent applications, those we may file in the future, or those we may license from third parties, may not result in patents being issued. If issued, they may not provide us with proprietary protection or competitive advantages against competitors with similar technology.
Non-payment or delay in payment of patent fees or annuities, whether intentional or unintentional, may result in loss of patents or patent rights important to our business. Many countries, including certain countries in Europe, have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In addition, many countries limit the enforceability of patents against third parties, including government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of the patent. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as do the laws of the United States, particularly in the field of medical products and procedures.
Many of our competitors have significant resources and incentives to apply for and obtain intellectual property rights that could limit or prevent our ability to commercialize our current or future products in the United States or abroad.
Many of our competitors who have significant resources and have made substantial investments in competing technologies may seek to apply for and obtain patents that will prevent, limit or interfere with our ability to make, use or sell our products either in the United States or in international markets. Our current or future U.S. or foreign patents may be challenged, circumvented by competitors or others or may be found to be invalid, unenforceable or insufficient. Since patent applications are confidential until patents are issued in the
14
United States, or in most cases, until after 18 months from filing of the application, or corresponding applications are published in other countries, and since publication of discoveries in the scientific or patent literature often lags behind actual discoveries, we cannot be certain that we were the first to make the inventions covered by each of our pending patent applications, or that we were the first to file patent applications for such inventions.
If we are unable to protect the confidentiality of our proprietary information and know-how, the value of our technology and products could be adversely affected.
In addition to patented technology, we rely on our unpatented proprietary technology, trade secrets, processes and know-how. We generally seek to protect this information by confidentiality agreements with our employees, consultants, scientific advisors and third parties. These agreements may be breached, and we may not have adequate remedies for any such breach. In addition, our trade secrets may otherwise become known or be independently developed by competitors. To the extent that our employees, consultants or contractors use intellectual property owned by others in their work for us, disputes may arise as to the rights in related or resulting know-how and inventions.
Intellectual property litigation is a common tactic in the medical device industry to gain competitive advantage. If we become subject to a lawsuit, we may be required to expend significant financial and other resources and our management’s attention may be diverted from our business.
There has been a history of frequent and extensive litigation regarding patent and other intellectual property rights in the medical device industry, and companies in the medical device industry have employed intellectual property litigation to gain a competitive advantage. Accordingly, we may become subject to patent infringement claims or litigation in a court of law, or interference proceedings declared by the USPTO to determine the priority of inventions or an opposition to a patent grant in a foreign jurisdiction. We may also become subject to claims or litigation seeking payment of royalties based on sales of our product in connection with licensing or similar joint development arrangements with third parties or in connection with claims of patent infringement. The defense and prosecution of intellectual property suits, USPTO interference or opposition proceedings and related legal and administrative proceedings, are both costly and time consuming and could result in substantial uncertainty to us. Litigation or regulatory proceedings may also be necessary to enforce patent or other intellectual property rights of ours or to determine the scope and validity of other parties’ proprietary rights. Any litigation, opposition or interference proceedings, with or without merit, may result in substantial expense to us, cause significant strain on our financial resources, divert the attention of our technical and management personnel and harm our reputation. We may not have the financial resources to defend our patents from infringement or claims of invalidity. An adverse determination in any litigation could subject us to significant liabilities to third parties, require us to seek licenses from or pay royalties to third parties or prevent us from manufacturing, selling or using our proposed products, any of which could have a material adverse effect on our business and prospects. We are not currently a party to any patent or other litigation.
Our VBLOC therapy or Maestro System may infringe or be claimed to infringe patents that we do not own or license, including patents that may issue in the future based on patent applications of which we are currently aware, as well as applications of which we are unaware. For example, we are aware of other companies that are investigating neurostimulation, including neuroblocking, and of patents and published patent applications held by companies in those fields. While we believe that none of such patents and patent applications are applicable to our products and technologies under development, third parties who own or control these patents and patent applications in the United States and abroad could bring claims against us that would cause us to incur substantial expenses and, if such claims are successfully asserted against us, they could cause us to pay substantial damages, could result in an injunction preventing us from selling, manufacturing or using our proposed products and would divert management’s attention. Because patent applications in many countries such as the United States are maintained under conditions of confidentiality and can take many years to issue, there may be applications now pending of which we are unaware and which may later result in issued patents that our products infringe. If a patent infringement suit were brought against us, we could be forced to stop our ongoing or planned clinical trials, or delay or abandon commercialization of the product that is subject of the suit.
15
As a result of patent infringement claims, or to avoid potential claims, we may choose or be required to seek a license from a third party and be required to pay license fees or royalties, or both. A license may not be available at all or on commercially reasonable terms, and we may not be able to redesign our products to avoid infringement. Modification of our products or development of new products could require us to conduct additional clinical trials and to revise our filings with the FDA and other regulatory bodies, which would be time-consuming and expensive. Even if we were able to obtain a license, the rights may be nonexclusive, which could result in our competitors gaining access to the same intellectual property. Ultimately, we could be forced to cease some aspect of our business operations if, as a result of actual or threatened patent infringement claims, we are unable to enter into licenses on acceptable terms. This could harm our business significantly.
Risks Relating to Ownership of Our Common Stock
The trading price of our common stock has been volatile and is likely to be volatile in the future.
The trading price of our common stock has been highly volatile. Further, our common stock has a limited trading history. Since our public offering in November 2007 through October 31, 2010 our stock price has fluctuated from a low of $1.52 to a high of $64.62. The market price for our common stock will be affected by a number of factors, including:
| • | the denial or delay of regulatory clearances or approvals of our product or receipt of regulatory approval of competing products; |
| • | our ability to accomplish clinical, regulatory and other product development milestones and to do so in accordance with the timing estimates we have publicly announced; |
| • | changes in policies affecting third-party coverage and reimbursement in the United States and other countries; |
| • | changes in government regulations and standards affecting the medical device industry and our product; |
| • | ability of our product, if it receives regulatory approval, to achieve market success; |
| • | the performance of third-party contract manufacturers and component suppliers; |
| • | our ability to develop sales and marketing capabilities; |
| • | actual or anticipated variations in our results of operations or those of our competitors; |
| • | announcements of new products, technological innovations or product advancements by us or our competitors; |
| • | developments with respect to patents and other intellectual property rights; |
| • | sales of common stock or other securities by us or our stockholders in the future; |
| • | additions or departures of key scientific or management personnel; |
| • | disputes or other developments relating to proprietary rights, including patents, litigation matters and our ability to obtain patent protection for our technologies; |
| • | trading volume of our common stock; |
| • | changes in earnings estimates or recommendations by securities analysts, failure to obtain or maintain analyst coverage of our common stock or our failure to achieve analyst earnings estimates; |
| • | public statements by analysts or clinicians regarding their perceptions of our clinical results or the effectiveness of our products; |
| • | decreases in market valuations of medical device companies; and |
| • | general market conditions and other factors unrelated to our operating performance or the operating performance of our competitors. |
16
The stock prices of many companies in the medical device industry have experienced wide fluctuations that have often been unrelated to the operating performance of these companies. Following periods of volatility in the market price of a company’s securities, securities class action litigation often has been initiated against a company. If class action litigation is initiated against us, we may incur substantial costs and our management’s attention may be diverted from our operations, which could significantly harm our business.
Our inability to comply with the listing requirements of the NASDAQ Capital Market could result in our common stock being delisted, which could affect its market price and liquidity and reduce our ability to raise capital.
We are required to meet certain qualitative and financial tests (including a minimum closing bid price of $1.00 per share for our common stock) to maintain the listing of our common stock on the NASDAQ Capital Market. If we do not maintain compliance with the continued listing requirements for the NASDAQ Capital Market within specified periods and subject to permitted extensions, our common stock may be recommended for delisting (subject to any appeal we would file). If our common stock were delisted, it could be more difficult to buy or sell our common stock and to obtain accurate quotations, and the price of our stock could suffer a material decline. Delisting would also impair our ability to raise capital.
The low trading volume of our common stock may adversely affect the price of our shares.
Although our common stock is listed on the NASDAQ Capital Market, our common stock has experienced low trading volume. Reported average daily trading volume in our common stock for the three month period ended September 30, 2010, was approximately 99,800 shares. Although we believe that our December 2010 public offering will improve the liquidity for our common stock, there is no assurance that the offering will increase the volume of trading in our common stock. Limited trading volume subjects our common stock to greater price volatility and may make it difficult for you to sell your shares at a price that is attractive to you.
17
Our directors and executive officers hold substantial control over us and could limit your ability to influence the outcome of key transactions, including changes of control.
Our executive officers and directors and entities affiliated with them beneficially own, in the aggregate (including options and warrants exercisable currently or within 60 days of October 31, 2010), approximately 30.1% of our outstanding common stock immediately following the closing of our December 2010 public offering. Our executive officers, directors and affiliated entities, if acting together, would be able to influence significantly all matters requiring approval by our stockholders, including the election of directors and the approval of mergers or other significant corporate transactions. The concentration of ownership of our common stock may have the effect of delaying, preventing or deterring a change of control of our company, could deprive our stockholders of an opportunity to receive a premium for their common stock as part of a sale of our company and may affect the market price of our common stock. This significant concentration of stock ownership may adversely affect the trading price of our common stock due to investors’ perception that conflicts of interest may exist or arise.
Sales of a substantial number of shares of our common stock in the public market by existing stockholders, or the perception that they may occur, could cause our stock price to decline.
Sales of substantial amounts of our common stock by us or by our stockholders, announcements of the proposed sales of substantial amounts of our common stock or the perception that substantial sales may be made, could cause the market price of our common stock to decline. We may issue additional shares of our common stock in follow-on offerings to raise additional capital or in connection with acquisitions or corporate alliances and we plan to issue additional shares to our employees, directors or consultants in connection with their services to us. All of the currently outstanding shares of our common stock are freely tradable under federal and state securities laws, except for shares held by our directors, officers and certain greater than five percent stockholders, which may be subject to volume limitations, and shares of common stock acquired upon conversion of the preferred stock issued in connection with our recent private placement offering. Following the expiration of lock-up agreements entered into for the benefit of the underwriter of our December 2010 public offering by certain holders of our common stock, including our directors and executive officers and their affiliated entities 7,184,078 shares of our common stock will become eligible for sale in the public markets from time to time, subject to restrictions under the Securities Act of 1933, as amended (the Securities Act). The underwriter may, in its sole discretion and at any time, without notice, release all or any portion of the shares of common stock subject to the lock-up agreements for sale in the public and private markets prior to the expiration of the lock-up. Due to these factors, sales of a substantial number of shares of our common stock in the public market could occur at any time and could reduce the market price of our common stock.
In addition, certain of our stockholders and warrantholders have rights, subject to some conditions, to require us to file registration statements covering their shares or to include their shares in registration statements that we may file for ourselves or other stockholders. If we were to include in a company-initiated registration
18
statement shares held by those holders pursuant to the exercise of their registration rights, the sale of those shares could impair our ability to raise needed capital by depressing the price at which we could sell our common stock.
Our organizational documents and Delaware law make a takeover of our company more difficult, which may prevent certain changes in control and limit the market price of our common stock.
Our certificate of incorporation and bylaws and Section 203 of the Delaware General Corporation Law contain provisions that may have the effect of deterring or delaying attempts by our stockholders to remove or replace management, engage in proxy contests and effect changes in control. These provisions include:
| • | the ability of our board of directors to create and issue preferred stock without stockholder approval, which could be used to implement anti-takeover devices; |
| • | the authority for our board of directors to issue without stockholder approval up to 85,000,000 shares of common stock, that, if issued, would dilute the ownership of our stockholders; |
| • | the advance notice requirement for director nominations or for proposals that can be acted upon at stockholder meetings; |
| • | a classified and staggered board of directors, which may make it more difficult for a person who acquires control of a majority of our outstanding voting stock to replace all or a majority of our directors; |
| • | the prohibition on actions by written consent of our stockholders; |
| • | the limitation on who may call a special meeting of stockolders; |
| • | the prohibition on stockholders accumulating their votes for the election of directors; and |
| • | the ability of stockholders to amend our bylaws only upon receiving a majority of the votes entitled to be cast by holders of all outstanding shares then entitled to vote generally in the election of directors, voting together as a single class. |
In addition, as a Delaware corporation, we are subject to Delaware law, including Section 203 of the Delaware General Corporation Law. In general, Section 203 prohibits a Delaware corporation from engaging in any business combination with any interested stockholder for a period of three years following the date that the stockholder became an interested stockholder unless certain specific requirements are met as set forth in Section 203. These provisions, alone or together, could have the effect of deterring or delaying changes in incumbent management, proxy contests or changes in control.
These provisions also could discourage proxy contests and make it more difficult for you and other stockholders to elect directors and take other corporate actions. The existence of these provisions could limit the price that investors might be willing to pay in the future for shares of our common stock. Some provisions in our certificate of incorporation and bylaws may deter third parties from acquiring us, which may limit the market price of our common stock.
We have not paid dividends in the past and do not expect to pay dividends in the future, and any return on investment may be limited to the value of our common stock.
We have never paid dividends on our common stock and do not anticipate paying dividends on our common stock in the foreseeable future. The payment of dividends on our common stock will depend on our earnings, financial condition and other business and economic factors affecting us at such time as our board of directors may consider relevant. Our credit agreement also restricts our ability to pay dividends. If we do not pay dividends, our common stock may be less valuable because a return on your investment will only occur if our stock price appreciates.
19